SHERCO FACTORY TRIPLE CLAMP SET BY XTRIG - BLUE
ITEM No: 8668
ROCS X-trig triple trees have the X-clamp system: A system which, thanks to the eccentric steering column axle, allows the motorcycle caster angle (off-set) to be quickly changed. This angle is calculated in relation to the distance between the steering column axis and the centre of the fork legs via a vertical axis. Modifying this changes the behaviour (handling) of the motorcycle; it allows you to adjust the front axle according to the type of terrain (fast or a technical circuit).
Factory setting: 20mm / X-Trig setting: 20 or 22mm These ROCS X-Trig triple trees also have many other advantages:
- Improved responsiveness of the fork: perfect roundness in the clamping zone, even under load.
- Higher resistance to turning and anti-deformation of the fork tubes when tightening the clamps.
- Better rigidity of the front axle for optimal operation of the fork.
- Secure tightening thanks to the opposite location of the screws.
- Extremely high quality of the machining and finishing. - Reinforced aluminium.
- Developed in collaboration with the greatest MX GP teams in the most extreme conditions.
- Indicator located on the upper tee to show the offset chosen.
- Supplied with the lower bearing mounted on the steering column.
- The diagonal cut of the lower crown allows the tightening to be evenly distributed to avoid any deformation of the fork tubes.
- Tightening torques indicated on the 2 trees.
- Completely replaces the original triple trees.
- Colour of the anodizing provides a "factory" appearance.
- The installation of the X-trig ROCS trees will provide improved performance and riding pleasure at every level.
BUY ONLINE
FITMENT
2T
125 SE Factory: 2021 > 2024
250 SE Factory: 2019 > 2024
300 SE Factory: 2019 > 2024
4T
250 SEF Factory: 2019 > 2024
300 SEF Factory: 2019 > 2024
450 SEF Factory: 2019 > 2024
500 SEF Factory: 2019 > 2024